82 lines
3.2 KiB
Python
82 lines
3.2 KiB
Python
"""Implements a HD44780 character LCD connected via PCF8574 on I2C.
|
|
This was tested with: https://www.wemos.cc/product/d1-mini.html"""
|
|
|
|
from lcd_api import LcdApi
|
|
from time import sleep_ms
|
|
|
|
# The PCF8574 has a jumper selectable address: 0x20 - 0x27
|
|
DEFAULT_I2C_ADDR = 0x27
|
|
|
|
# Defines shifts or masks for the various LCD line attached to the PCF8574
|
|
|
|
MASK_RS = 0x01
|
|
MASK_RW = 0x02
|
|
MASK_E = 0x04
|
|
SHIFT_BACKLIGHT = 3
|
|
SHIFT_DATA = 4
|
|
|
|
|
|
class I2cLcd(LcdApi):
|
|
"""Implements a HD44780 character LCD connected via PCF8574 on I2C."""
|
|
|
|
def __init__(self, i2c, i2c_addr, num_lines, num_columns):
|
|
self.i2c = i2c
|
|
self.i2c_addr = i2c_addr
|
|
self.i2c.writeto(self.i2c_addr, bytearray([0]))
|
|
sleep_ms(20) # Allow LCD time to powerup
|
|
# Send reset 3 times
|
|
self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
|
|
sleep_ms(5) # need to delay at least 4.1 msec
|
|
self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
|
|
sleep_ms(1)
|
|
self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
|
|
sleep_ms(1)
|
|
# Put LCD into 4 bit mode
|
|
self.hal_write_init_nibble(self.LCD_FUNCTION)
|
|
sleep_ms(1)
|
|
LcdApi.__init__(self, num_lines, num_columns)
|
|
cmd = self.LCD_FUNCTION
|
|
if num_lines > 1:
|
|
cmd |= self.LCD_FUNCTION_2LINES
|
|
self.hal_write_command(cmd)
|
|
|
|
def hal_write_init_nibble(self, nibble):
|
|
"""Writes an initialization nibble to the LCD.
|
|
|
|
This particular function is only used during initialization.
|
|
"""
|
|
byte = ((nibble >> 4) & 0x0f) << SHIFT_DATA
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte | MASK_E]))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte]))
|
|
|
|
def hal_backlight_on(self):
|
|
"""Allows the hal layer to turn the backlight on."""
|
|
self.i2c.writeto(self.i2c_addr, bytearray([1 << SHIFT_BACKLIGHT]))
|
|
|
|
def hal_backlight_off(self):
|
|
"""Allows the hal layer to turn the backlight off."""
|
|
self.i2c.writeto(self.i2c_addr, bytearray([0]))
|
|
|
|
def hal_write_command(self, cmd):
|
|
"""Writes a command to the LCD.
|
|
|
|
Data is latched on the falling edge of E.
|
|
"""
|
|
byte = ((self.backlight << SHIFT_BACKLIGHT) | (((cmd >> 4) & 0x0f) << SHIFT_DATA))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte | MASK_E]))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte]))
|
|
byte = ((self.backlight << SHIFT_BACKLIGHT) | ((cmd & 0x0f) << SHIFT_DATA))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte | MASK_E]))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte]))
|
|
if cmd <= 3:
|
|
# The home and clear commands require a worst case delay of 4.1 msec
|
|
sleep_ms(5)
|
|
|
|
def hal_write_data(self, data):
|
|
"""Write data to the LCD."""
|
|
byte = (MASK_RS | (self.backlight << SHIFT_BACKLIGHT) | (((data >> 4) & 0x0f) << SHIFT_DATA))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte | MASK_E]))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte]))
|
|
byte = (MASK_RS | (self.backlight << SHIFT_BACKLIGHT) | ((data & 0x0f) << SHIFT_DATA))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte | MASK_E]))
|
|
self.i2c.writeto(self.i2c_addr, bytearray([byte]))
|